Contact Us

Phone: (503) 253-8837
7:15 AM - 4:00 PM PST

Email us

or use our Contact page

Accessories for:
Pro Siding Accessories
Fiber Cement Accessories
The 199 Series Corners are manufactured with a full wraparound lower lip requiring no bottom nail. Manufactured in smooth or wood grain textured. 0.015 aluminum, the outside is primed and ready to paint. The inside is coated with an epoxy backer to prevent corrosion. Face width per side at the bottom 1-3/4", tapering to 1-1/4" at the top.
Jump To:
199 Series Corners
199 Series Corners (Vertical Grain/Shake)
The 199 Series Corners are manufactured with a full wraparound lower lip requiring no bottom nail. The outside is primed and ready to paint. The inside is coated with an epoxy backer to prevent corrosion. Face width per side at the bottom 1-3/4", tapering to 1-1/4" at the top.  These corners are manufactured with a vertical grain/shake pattern.
ColorPlus Siding Corners
The 199 Series Corners are manufactured with a full wraparound lower lip requiring no bottom nail. Manufactured in smooth or wood grain textured. 0.015 aluminum, the inside is coated with an epoxy backer to prevent corrosion. Face width per side at the bottom 1-3/4", tapering to 1-1/4" at the top.  Available in 26 ColorPlus colors developed for a perfect match in color and sheen.
Joint Covers protect the butt joint where two siding planks meet and a 1/4" expansion joint helps to prevent siding buckling. A wraparound lower lip hooks the siding and requires one nail to hold it in place. These covers are primed on the outside for easy painting and coated on the inside with a chromate backer to inhibit corrosion.
The Joint Covers protect the butt joint where two siding planks meet and a 1/4" expansion joint helps to prevent siding buckling. A wraparound lower lip hooks the siding and requires one nail to hold it in place. These covers are available in 26 ColorPlus® colors and are coated on the inside with a chromate backer to inhibit corrosion.
Colorplus 140 Series Joint Covers
140 Series Joint Covers
Junction Flashing is made of 0.015 primed aluminum with an epoxy backer to protect from corrosion.  Junction Flashing is manufactured specifically for Fiber cement siding as a weather resistant barrier.  The ¼” Slip Fit Positioning Lip insures quick and accurate placement every time.
The 1-1/4" overlap of Off Stud Joiners saves additional installation time and by not joining directly over the stud you can eliminate corner breakout. Off Stud Joiners are manufactured using 24 gauge, G-90 galvanized steel, preprimed for easy painting. The joiners creates a solid backing behind the joint producing a better caulk line and holds the bottom edge in line to provide a seamless appearing joint.
Junction Flashing
ColorPlus Junction Flashing
Junction Flashing available in all 26 ColorPlus® colors.  Junction Flashing is made of 0.015 primed aluminum with an epoxy backer to protect from corrosion.  Junction Flashing is manufactured specifically for Fiber cement siding as a weather resistant barrier.  The ¼” Slip Fit Positioning Lip insures quick and accurate placement every time.
The clips can significantly reduce installation time, and effectively reduce the number of workers required to install the siding, resulting in overall job cost savings. Each clip gauges the 1-1/4" set, while providing a shelf for the next lap to rest on while nailing. Aligning Clips are manufactured using G-90 galvanized steel, prime coated for easy painting. Once installed and painted, the small portion of the clip that is left exposed is virtually invisible. No part of the clip covers the exposed face of the siding.

The 299 Series corners are designed to be used with Artisan Lap siding, accentuating the shadow line and thickness of the Artisan Lap Siding.  Manufactured with a full wraparound lower lip, these corners require no bottom nail and are easily installed after the Artisan Lap is hung.  Complementing the quality of Artisan siding, the material used is heavy .019" aluminum, primed and ready for paint on the outside and lined with a chromate epoxy coating for full protection on the inside.  The 299 Series corners are available to fit all Artisan Lap siding sizes, in both smooth and wood grain textures.  To ensure full coverage of the thick Artisan siding, the corners are a full 2" side at the bottom, tapering down to 1-3/8" at the top to create a continuous edge line.

After installation, the breakaway portion of the clip is removed with three or four quick up and down bending motions. Once the breakaway portion is removed, there is no visible shelf remaining. Since no visible part remains, the Quick Clip is ideal for Pre-Finished siding applications.
New!   Quick Clips
aaaaaaaaaaaaiii